Activity Stream

thank you a lot :)

Good idea, have to see if I can find a cheep one.

So what would you suggest?

Replace catalytic converter

yeah, just coming... These pictures are a little old, the day it came to my warehouse. I have some recent ones to upload.

First posts normally go in introductions else you could get a free fix and we never see you again!!! You car spec says 0. You need to get your...

Welcome to the forum. Your car spec says 0. Give details of this Beetle?

Title changed and your posted edited.

yeah master cylinder and break servo both together cause I dont Think master cylinder from mk3r goes into mk1 break servo I havent try it yet but...

Welcome to the forum Jukka. After being prompted. ;)

main cylinder Don't you mean master cylinder?

I have put an 1.9 TD on my mk1 1980 it have been petrol before but now its diesel and its really big different on acceleration and torque too but...

The AD spec for my Golf is: <MY 2009: Timing belt - Renew: Every 80,000 miles or 48 months. Timing belt tensioner - Renew: Every 160,000 miles...

Hi if I put brake servo and main cylinder from mk3 they should workwhat do you think ?

Crasher , thank you for your help ,looks like I got another 12 months then ,can save up for it;-).

Ok cool, keep us posted.

INA is a reputable brand. My experience is that all the big German brands are very incestuous and you buy somrthing in one box and it says somthing...

Progress is going backwards nowadays Crasher. I have been wondering recently when this backwards progress started and it is roughly 1962-63.

I am not 100% sure on left hand drive but on right hand drive a Golf 2/3 master cylinder will not fit a Golf 1 servo BUT a Golf 2 servo will fit a...

A Golf 3 AAZ TD engine will bolt directly onto a standard Golf 2 subframe if you use the Golf 2 rear engine mount bracket and the late 16v hydraulic...

Every five years or roughly 80k miles

506.01 is the old diesel PD LongLife spec usually 0W30, so superceded by 507.00 . 506.01 has the same camlobe protection as 507.00 but falls...

I thought if mk3 front member could fit mk2 but I decided to fix it it was lot of work but at last I have welded it and painted with HAMMARLACK and...

Hallo, a short feedback, the sensor wires are good. I dismounted the turbocharger, egr and throttle. The turbocharger was pushing oil in the...

Thankfully a 111.961 Merc petrol engine doesn't require PD cam lube protection! Where does 506.01 PD spec oil fall into the grand scheme of...

Made my evening !