Results 1 to 2 of 2

Thread: Towing electrics nightmare

  1. #1
    Junior Member
    Join Date
    Nov 2018
    Post Thanks / Like

    Towing electrics nightmare

    Hi, first post & newbie

    I'm pulling what's left of my hair out trying to sort this. Bottom line, my trailer lighting board lead went under my trailer wheel while towing & stripped all the wires back to the copper, probably shorting something along the way. There was no strain put on the rear lighting socket as it was clove hitched around the jockey, it all looks factory fitted into the loom via the conector, bought a new light board, checked continuity across that & the 13-7 pin adaptor, everything good there, all fuses - in cab & engine bay are all fine, I'm getting brake & fog lights but no indicators or side lights on the new board?
    The light fault lamp comes on sometimes on the dash also.

    Any thoughts, should I be looking for a module?

    Any help appreciated, cheers in advance

  2. #2
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Stoke on Trent
    Post Thanks / Like
    First posts normally go in introductions else you could get a free fix and we never see you again!!!

    Your car spec says 0 even though you have posted in Amarok sub forum.

    Can I suggest that you add your car spec to your signature as it will save users asking every time, if you know the engine code that will also be great? Oh you can't do this of a phone. Adding your car spec

    Data Sticker/Options Sticker and Engine Codes
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts