Results 1 to 2 of 2

Thread: 01276 abs pump signal outside tolerance

  1. #1
    Junior Member
    Join Date
    Dec 2018
    Location
    Leicester
    Posts
    5
    Post Thanks / Like

    01276 abs pump signal outside tolerance

    Hi all my vw golf 3.5 cabriolet abs light is on fault 01276 I had front driver's side and rear driver's side sensor not working I have now got them both working but still got this 01276 fault. I have took fuse out of the fuse box under the steering wheel switched light of next day came back on, I keep seeing about a second fuse and relay box near battery but can't see it anybody had this fault and what was the outcome thanks shane
    2000 Golf Cabriolet 2.0 AWG, Petrol

  2. #2
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Location
    Stoke on Trent
    Posts
    12,687
    Post Thanks / Like
    You still haven't made an intro after being asked.

    What did you use to find this error code?

    VAG Error Code: 01276

    Fault Location:
    Hydraulic Pump (V64) (Anti-Lock Brake System (ABS)) - Signal Outside Specifications

    Possible Cause:
    Malfunction Indicator Lamp (MIL)(K83) active.

    ABS Hydraulic Pump (V64) Connector to Control Module faulty.
    Wiring/Connector(s).
    Hydraulic Pump (V64) faulty.
    ABS Control Module (J104)/Brake Electronics Control Module (J104) faulty.

    Possible Solutions:
    Check/Replace all faulty Wiring/Connector(s).
    Read Measuring Value Blocks (MVB).
    Check ABS Hydraulic Pump (V64) Connector to Control Module.
    Check/Replace Hydraulic Pump (V64).
    Check/Replace ABS Control Module (J104)/Brake Electronics Control Module (J104).


    As taken from my new EOBD II Fault Codes Software
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •