Results 1 to 3 of 3

Thread: New to the forum

  1. #1
    Junior Member
    Join Date
    Jan 2019
    Post Thanks / Like

    New to the forum

    Hi all, I have a 2014 Polo 1.2 TDI (daughters car) and 2010 Golf 1.6 TDI which im currently having trouble with.fault code is p02011 which launch diag is saying no1 injector fault. I have very limited diagnostic and electrical testing capabilities but tried testing injectors for ohms and no1 gives a reading of 15 if I remember correctly and the other 3 give no reading but im not sure if im testing correctly. Has anyone had this trouble or if anyone could help that would be great.

  2. #2
    Senior Member Gazwould's Avatar
    Join Date
    Apr 2015
    Post Thanks / Like
    Expect a warm welcome...

  3. Thanks Pete1 thanked for this post
  4. #3
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Stoke on Trent
    Post Thanks / Like
    Welcome to the forum.

    Its nice to see you made an intro on your own.

    Your car spec says 0, only what I've added from this post.

    You can Goggle all day for ohms reading for TDI-CR injectors. They are well over priced from a dealer.

    You need to get your motor scanned (preferably with VAG-COM\VCDS) for any error codes logged in the ecu and post them, that will save a lot of guessing and check systems out.
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts