Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Crafter question

  1. #11
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Location
    Stoke on Trent
    Posts
    15,920
    Post Thanks / Like
    Quote Originally Posted by Calcivid View Post

    P013500 o2 sensor heater circ. bank 1 - sensor malfunction
    P14400 EGR Vacuum regulator solenoid valve - open circuit
    P225100 P/S o2 sensor negative current control irc. bank 1 sensor 1
    P040300 P/S exhaust gas recirculation circ.
    P242A00 P/S exhaust gas temperature sensor circ. bank 1 - sensor 3
    P246E00 P/S exhaust gas temperature sensor circ. bank 1 - sensor 4
    P22D500 Turbocharger turbine inlet valve position sensor circ rang/performance
    What were those error codes scanned with a generic scanner as there are too many 00's?

    You need to get your motor scanned (preferably with VAG-COM\VCDS) for any error codes logged in the ecu and post them, that will save a lot of guessing and check systems out.
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.


  2. #12
    Junior Member
    Join Date
    Feb 2020
    Posts
    7
    Post Thanks / Like
    Hi,

    As mentioned on the previous post, there are only 2 errors showing after diagnose which are:
    P1440 EGR vacuum regulator solenoid valve open circuit (passive/sporadic)
    P0403 EGR circuit (active/static).
    2015 Crafter 2.0 TDI-CR CKUB BiTurbo

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •