Results 1 to 3 of 3

Thread: 2014 Passat 1.6 TDI HELP!

  1. #1
    Junior Member
    Join Date
    May 2020
    Posts
    1
    Post Thanks / Like

    2014 Passat 1.6 TDI HELP!

    hi guys, im a newbie to forums so sorry if I'm lacking any etiquette. Basically I nipped to the shops earlier, car fired up fine, came back to my car and it wouldn't start. It was turning but just wouldn't fire.. I saw a flashing coil on my dash, but since I'm working from home I had to run back to get on a conference call. Later I returned and my car started and drove fine. Once I got home I turned it off and fired it up again a few times and it was fine. Left it 5 minutes and it wouldnt fire again. Guy next door hooked it up and it spat code p060600 ecm/pcm processor. Any ideas on where to even start? All I know is it sounds expensive...
    :cautious:

  2. #2
    Administrator Crasher's Avatar
    Join Date
    Apr 2006
    Location
    Nottingham, England
    Posts
    23,618
    Post Thanks / Like
    I would start with a proper code read as that code infers the engine ECU is faulty and that is very rare... also very expensive dealer or VAG specialist work.
    "I disapprove of what you say, but I will defend to the death your right to say it"

    Evelyn Beatrice Hall (28 September 1868 13 April 1956)

  3. #3
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Location
    Stoke on Trent
    Posts
    15,637
    Post Thanks / Like
    First posts normally go in introductions else you could get a free fix and we never see you again!!!

    Your car spec says 0, only what I've added from this thread.

    As suggested: You need to get your motor scanned (preferably with VAG-COM\VCDS) for any error codes logged in the ecu and post them, that will save a lot of guessing and check systems out.

    Thread moved to the correct section as OP can't read sub forum titles as its not a general question.
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •