Results 1 to 4 of 4

Thread: Passat 04 1.9 tdi

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Posts
    2
    Post Thanks / Like

    Passat 04 1.9 tdi

    Doesn't have what gear you are in on dash and has engine management light on abs and circle with triangle on dates when plugged in that transmission control not responding what is wrong with the car please help

  2. #2
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Location
    Stoke on Trent
    Posts
    15,957
    Post Thanks / Like
    First posts normally go in introductions else you could get a free fix and we never see you again!!!

    Your car spec says 0, only what I've added from this thread.

    You need to get your motor scanned (preferably with VAG-COM\VCDS) for any error codes logged in the ecu and post them, that will save a lot of guessing and check systems out.
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.


  3. #3
    Junior Member
    Join Date
    Jun 2020
    Posts
    2
    Post Thanks / Like
    It says serial communication link and P0600

  4. #4
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Location
    Stoke on Trent
    Posts
    15,957
    Post Thanks / Like
    Quote Originally Posted by cathymclennan45@gmail.com View Post
    It says serial communication link and P0600
    Scanned with what?

    VAG Error Code: 16984
    EOBD II Error Code: P0600

    Fault Location:
    Serial Communication Link - Malfunction/Message Missing

    Possible Cause:
    Malfunction Indicator Lamp (MIL)(K83) Non Emission Fault - No warning light.

    Wiring/Connector(s).
    Connected system.
    Trouble code(s) stored in other system.
    Low battery voltage.
    Engine Control Module (ECM).

    Possible Solution:
    Check Can-Bus matching resistor.
    Check and charge battery.

    Description:
    The Engine Control Module (ECM) communicates with all Data Bus-capable control modules via a CAN Data Bus.
    These Data Bus-capable control modules are connected via two Data Bus wires which are twisted together (CAN_High and CAN_Low), and exchange information (messages). Missing information on the Data Bus is recognized as a malfunction and stored.
    Trouble-free operation of the CAN-Bus requires that it have a terminal resistance. This central terminal resistor is located in the Engine Control Module (ECM).


    As taken from my new EOBD II Fault Codes Software
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •