Results 1 to 8 of 8

Thread: ABS sensor resistance value?

  1. #1
    Junior Member
    Join Date
    Dec 2019
    Location
    Surrey
    Posts
    13
    Post Thanks / Like

    ABS sensor resistance value?

    Greetings.
    I have an error code on my Caddy maxi van
    Narrowed it down to the front right hand wheel ABS sensor so I measured the Ohmic value today and got 490 Ohms across the sensor pins.
    Does anyone know what the value should be?
    I've looked at Youtube clips and found values of about 1000 Ohms on other VW models but non specifically for my Caddy van.
    I realise it could also be the front wheel bearing magnetic pickup but right now I'm concentrating on the wheel sensor.
    Could someone please help?
    Many thanks.
    Last edited by Edwin 01; 22-06-20 at 19:31.
    2013 Caddy Maxi 1.6 TDI-CR CAYD (102PS) C20 StartLine BMT panel Van

  2. #2
    Administrator Crasher's Avatar
    Join Date
    Apr 2006
    Location
    Nottingham, England
    Posts
    24,032
    Post Thanks / Like
    I suspect you are over analysing this, what is the fault code?
    "I disapprove of what you say, but I will defend to the death your right to say it"

    Evelyn Beatrice Hall (28 September 1868 13 April 1956)

  3. #3
    Junior Member
    Join Date
    Dec 2019
    Location
    Surrey
    Posts
    13
    Post Thanks / Like
    Address 03: ABS Brakes (J104) Labels:. 1K0-907-379-60EC1F.clb
    Part No SW: 1K0 907 379 BL HW: 1K0 907 379 BL
    Component: ESP MK60EC1 H31 0152
    Revision: 00H31001
    Coding: 633C400D092603FEC61002E69020C091310000
    Shop #: WSC 35110 377 08192
    VCID: 7DA7FE1A9DF40DC338D-8028


    1 Fault Found:
    00285 - ABS Wheel Speed Sensor; Front Right (G45)
    012 - Electrical Fault in Circuit
    Freeze Frame:
    Fault Status: 01101100
    Fault Priority: 1
    Fault Frequency: 1
    Reset counter: 48
    Mileage: 62855 km
    Time Indication: 0
    Date: 2020.06.14
    Time: 17:54:26


    Freeze Frame:
    Count: 0
    Count: 0
    Count: 12800
    Count: 48
    Count: 49920
    Count: 56833
    Count: 512
    Count: 0


    I took the sensor out cleaned it measured Ohms put it back cleared the fault codes and drove the van and the fault hasn't come back yet.
    2013 Caddy Maxi 1.6 TDI-CR CAYD (102PS) C20 StartLine BMT panel Van

  4. #4
    Senior Member
    Join Date
    Mar 2014
    Location
    Manchester
    Posts
    226
    Post Thanks / Like
    Can't help ..but...you have three more sensors to measure/compare...

    John
    2005 Polo 9N3 1.4S 16v, Petrol, BKY engine, GRZ gearbox, 5 Speed

  5. #5
    Junior Member
    Join Date
    Dec 2019
    Location
    Surrey
    Posts
    13
    Post Thanks / Like
    Quote Originally Posted by John.P.Clegg View Post
    Can't help ..but...you have three more sensors to measure/compare...

    John
    The genius thinking is in the small things, thanks a lot, what's wrong with my brain I don't know.
    Obvious.
    2013 Caddy Maxi 1.6 TDI-CR CAYD (102PS) C20 StartLine BMT panel Van

  6. #6
    Junior Member
    Join Date
    Dec 2019
    Location
    Surrey
    Posts
    13
    Post Thanks / Like
    By the way is there a good place to buy parts online, any recommendations?
    2013 Caddy Maxi 1.6 TDI-CR CAYD (102PS) C20 StartLine BMT panel Van

  7. #7
    Administrator Keithuk's Avatar
    Join Date
    Jun 2012
    Location
    Stoke on Trent
    Posts
    15,984
    Post Thanks / Like
    VAG Error Code: 00285

    Fault Location:
    Anti-Lock Brake System (ABS) Wheel Speed Sensor: Front Right (G45) - Electrical Fault in Circuit/Open Circuit/Short Circuit to Earth/Positive/Signal Outside Specifications/Implausible Signal

    Possible Cause:
    Malfunction Indicator Lamp (MIL)(K83) active.

    Fuse(s).
    Open Circuit in Wiring from/to ABS Wheel Speed Sensor: Front Right (G45).
    ABS Wheel Speed Sensor: Front Right (G45) faulty.

    Possible Solutions:
    Check/Replace Fuse(s).
    Check/Replace all faulty Wiring/Connector(s).
    Read Measuring Value Blocks (MVB).
    Check/Replace ABS Wheel Speed Sensor: Front Right (G45).

    Use VC-Scope to plot the graphs from all ABS sensors and compare the results.
    You must get a passenger to operate the laptop while driving.


    As taken from my new EOBD II Fault Codes Software
    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Transmission Code: KXZ, Flat Tyre Indicator, Basic Protection Pack + VCDS.


  8. #8
    Junior Member
    Join Date
    Dec 2019
    Location
    Surrey
    Posts
    13
    Post Thanks / Like
    Hi there I fitted a new wheel speed sensor for 20, cleared the fault codes and the fault so far has not come back.
    Will give you more details later.
    Thanks.
    2013 Caddy Maxi 1.6 TDI-CR CAYD (102PS) C20 StartLine BMT panel Van

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •