UK Volkswagen Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. VW Engine and Gearbox
    Hi, I have a 2009 VW crafter 2.5 CR50 and I need to change the sump. Can I do this in place without removing the gearbox and/or removing the engine. Does the engine need to be lifted up to get the sump clear and out ? TIA
  2. Crafter 1 - (type 2E) 2006 - 2017
    Hi Guys! My name's Tom, I'm trying to help my dad fix his VW Crafter hope you can help. We've recently had an engine replacement on my dads van, everything seemed to be running fine. However yesterday the van went into limp mode with a check engine light and a flashing glow plug light...
  3. New Members Introduce Yourself Here
    Hello everyone, and many thanks for allowing me to join. I have a 2011 LWB Crafter which appears to have an issue......every 3-5 engine starts the engine management light comes on......she doesn’t go into limp mode or anything when the engine management light is on but when I read the codes...
  4. VW Engine and Gearbox
    Hi I have a 2013 Crafter 2.0 TDI, when i start it up the engine management light comes on along with the glow plug light, these both then start to flash and when driving the vehicle the engine has low power (I presume a limp mode to protect it). Im wondering what might be causing the lights to...
  5. Crafter 2 (type SY & SZ) 2016>
    Firstly, HELLO! Secondly I'm the proud owner of a few VW's... The latest is my bread and butter Crafter. Its so far been awesome. Its the first time ive put lots of bells and whistles on a new vehicle too! I was wondering if anyone here has any skills with the VCDS they can share to tweak...
  6. Crafter 1 - (type 2E) 2006 - 2017
    Does anyone have a Long Wheel Base Crafter with which they could whip together a basic floor plan for me with measurements of spaces and anywhere that the floor rises or steps down? I've found some on various blogs and whatnot but I'm not sure what model they are for and often they're not simple...
  7. Crafter 1 - (type 2E) 2006 - 2017
    On starting up from cold this vehicle has plenty of power for about 40 miles when stopped and left to stand for a few hours and started up again goes well for a few miles and it pulls back to 40 mph, in order to make it get back to speed, I have to turn off engine and restart and full power is...
  8. Crafter 1 - (type 2E) 2006 - 2017
    Hi there. My name is Deryck and I'm new on this forum.yay. I'm a proudly owner of a 2012 Crafter, but in the last few weeks on the dash i get two flashing lights: emission control lamp and engine management lamp. I used a cheap chinese obd scanner and I got P261A and P2BAC (this one cannot be...
  9. New Members Introduce Yourself Here
    Hi Im Gavin I'm new to forums but really need some help. I have a 2010 Vw crafter that went into limp mode when I sent someone to Scotland for me. He blocked the dpf so I've had dpf off and manually cleaned it to get it within threshold to regenerate, I called rac out who kindly regenerated...
  10. Crafter 1 - (type 2E) 2006 - 2017
    2011 Crafter Long and High starts and then cuts out immediately when engine is warm. From cold it starts and drives with no issue what so ever. Booked into VW to be told they cannot find anything wrong at all. Replaced crank case sensor, no difference. When it's running it is absolutely perfect...
  11. Crafter 1 - (type 2E) 2006 - 2017
    Hello I have just treated myself to a 2009 Crafter I have no idea how any of the buttons controls ect work I have searched for hours with no avail so can anybody please tell me where i can order a handbook or download a manual which will have details of the dashboard in it ? Any help...
  12. VW Engine and Gearbox
    Hello, I have a 2007 vw crafter, the radiator fan comes on when I drive off and stay on till I turn the engine off,there are no warning lights on and the van drives fine, is this normal please
1-12 of 12 Results
Top