dsg7 problem...

tyyy84

New member
Joined
Apr 28, 2013
Messages
5
hello! my name is Cristi, and i am from Romania ...


I just boot a VW Jetta 1.6 TDI DSG7 gear box .... The car runs perfectly, and the gear box changes gears perfectly ... But the gear indictor flashes .... it Shows me a key and THEN the gear and sow on ...


in VCDs:
Thursday, 25 April, 2013,14:21:41:32264
VCDs Version: Release 11.11.3
Data version: 20120401



Address 02: Auto Trans Labels: 0AM-300-04x.lbl
Control Module Part Number: 0AM 300 050 G HW: 0AM 927 769 D
Component and/or Version: GSG DSG AG7 403 2321
Software Coding: 0000020
Work Shop Code: WSC 02069 000 90108
VCID: 2D5B176DB40A1F1
2 Faults Found:


006079 - Hydraulic Pump
P17BF - 000 - Play Protection - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 10
Mileage: 69399 km
Time Indication: 0
Date: 2024.14.29
Time: 14:12:05


006079 - Hydraulic Pump
P17BF - 001 - Play Protection - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 10
Mileage: 69399 km
Time Indication: 0
Date: 2024.14.29
Time: 14:12:05


Pleas help, i dont now what to do....

Excuse my speling, i am not sow good whit it...
 

tyyy84

New member
Joined
Apr 28, 2013
Messages
5
i whent to service, and test the car, the oil pressure in the gear box is ok, 45-60 bar, and it found a new error p0841 - transmission fluid pressure sensor/ swich A range/ performance inrermittent...

they din not have a solution form my problem, they said they will change the mecatronic....

have other opinions ??????
 

Keithuk

Super Moderator
Staff member
Joined
Jun 4, 2012
Messages
18,938
Location
Stoke on Trent UK
EOBD II Error Code: P0841

Fault Location:
Transmission Fluid Pressure (TFP) Sensor/Switch A - Range/Performance Problem

Possible Cause:
Wiring.
Poor connection.
Transmission fluid pressure (TFP) sensor/switch.
Engine control module (ECM)/Powertrain control module (PCM)/Transmission control module (TCM) (J217).

As taken from my EOBD II Fault Codes Software

Can I suggest that you add your car spec to your signature as it will save users asking everytime, if you know the engine code that will also be great? Oh you can't do this of a phone. http://www.volkswagenforum.co.uk/f26/adding-your-car-spec-5119.html

Options Sticker and Engine Codes
 

tyyy84

New member
Joined
Apr 28, 2013
Messages
5
thanks Keithuk... can i check something, or everything is in the mecatronic unit???
 

adib

New member
Joined
Jan 11, 2021
Messages
2
You have a crack in the Mekatronic body and you lose pressure (there is a repair kit) or the Mekatronic pressure pump is worn and needs to be changed.
 
Top