UK Volkswagen Forum banner
1 - 16 of 16 Posts

·
Administrator
Joined
·
32,579 Posts
We would fit complete track rod kits from Febi as it is usually the inner ball joint which wears BUT this means crimping on new boots and this is evil without a special side access boot clamp pliers
 

·
Administrator
Joined
·
32,579 Posts
Of what ECP stock, Lemförder are the best and the best full stop.

The arms are VW# 1K0 423 810 A and not handed, the left track rod is VW# 1K0 423 811 J, the right is 1K0 423 812 J; of what ECP have TRW are perfect, there is no problem mixing and a pair of their Q Drive boot kits 612440471. Given the time we would order in Febi's 101413 and 101414 pro kits.

 

·
Registered
Joined
·
194 Posts
Discussion Starter · #10 ·
So lemforder rods and trw ends are ok to mix ? Have you used avs vw spears swaffam. Off them I can get febi 2x rods and febi 2x ends for £55 dose that seem about right or a little cheap
 

·
Registered
Joined
·
194 Posts
Discussion Starter · #11 ·
Or parts in motion £60 for the whole kit including the boot, both sides or mix and match at euro car parts for £100?
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top