Hello
we took down the engine to change pistons after an engine failure (there was a hole in one piston...). This was our first such experience with a car. When mounted everything back, the car turns-on in limp mode only (after 5s), and gives the P0321 code with the EPC light on. After checking the meaning of the code and much stuff on the web, we changed the G28 and G40 sensors and verified their wiring (voltage and ground connections). Did not solve the problem.
We have seen this also http://wiki.ross-tech.com/wiki/index.php/16705/P0321/000801 but not sure what we can do (magnetic coupling was not a problem before we took down the engine, computer was not changed/disconnected).
We would really appreciate help on what to do next.
Thanks
Emanuele
we took down the engine to change pistons after an engine failure (there was a hole in one piston...). This was our first such experience with a car. When mounted everything back, the car turns-on in limp mode only (after 5s), and gives the P0321 code with the EPC light on. After checking the meaning of the code and much stuff on the web, we changed the G28 and G40 sensors and verified their wiring (voltage and ground connections). Did not solve the problem.
We have seen this also http://wiki.ross-tech.com/wiki/index.php/16705/P0321/000801 but not sure what we can do (magnetic coupling was not a problem before we took down the engine, computer was not changed/disconnected).
We would really appreciate help on what to do next.
Thanks
Emanuele
