It sounds drivetrain rather than engine but I haven’t experienced this and without driving it, difficult to say. I will have a look in the known faults list on Tuesday, what is the VIN?

 

Thanks , Iv had a full diagnosis of the engine (no faults) and on live data everything is working fine .
starts lovely ideals perfect , drives fine when you gradually accelerate, but if you accelerate hard in 3/4/5/6 from low rev range up to 2000rpm you feel like a vibration/ shaking soon as you pass the 2000rpm totally gone in all gears ,
Don’t no what els to check / change to try and fix this issue. Really stuck at the moment.
I will have the vin sent over soon for you thanks

 

My initial suspicion would be a failing propshaft.

 

It’s just had a brand new prop shaft fitted

 

Where did the shaft come from?

 

I am having the exact same problem. Acceleration between 1500rpm and 2100rpm and the car shakes terribly. After that in any gear, the vibration goes away.
My Amarok has 380000km on the clock and did my first Clutch and DMF replacement about 30000km ago.
Just replaced the centre bearing and did the propshaft as this is what the garage advised caused the vibration. Vibration is still there.
15000km ago I had all my injectors tested and reconditioned as one was bad.
The only thing I have not yet done is replacing engine and gearbox mountings.
Had my car at 3 different dealers and they are all saying DMF. They are suggesting to replace it with a SMF instead.

Please let me know if you managed to resolve your problem?

 

Mine been doing exactly the same.... Did you figure out the problem?

 

Mine is doing the same thing, I’m thinking of changing the tail shaft… has anyone figured out what the cause/issue is?

 

Has anyone figured out the ISSUE? As mine is doing the same, have replaced aircon compressor, serpentine belt, gearbox mount. Have not yet replaced engine mounts yet

 

Hello, did anybody solve this?